The LM3565 is a 4 MHz fixed-frequency, current mode synchronous boost converter designed to drive two series flash LEDs at 930 mA. A high-voltage current source allows the LEDs to be terminated to the GND plane eliminating the need for an additional return trace back to the IC.
A dedicated Strobe pin provides a direct interface to trigger the flash event, while an external Torch pin provides an additional method for enabling the LEDs in a constant current mode. The LM3565 can adaptively scale the maximum flash level delivered to the LEDs based upon the measured input voltage.
Multiple protection features are available on the LM3565 ranging from over-voltage protection to output short-circuit detection.
The LM3565 has four selectable inductor current limits to help the user select an inductor that is appropriate for the design.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LM3565 4MHz, High-Current Flash LED Driver datasheet | 18 Dec 2012 | |
| White paper | Common LED Functions and LED Driver Design Considerations | 21 Sep 2020 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 25 Jun 2018 | ||
| User guide | LM3565EVM User's Guide (Rev. A) | 07 May 2013 |
For additional terms or required resources, click any title below to view the detail page where available.
| Package | Pins | Download |
|---|---|---|
| DSBGA (YZR) | 16 | View options |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.