PowerPAD is a trademark of Texas Instruments.
The TPA112 is a stereo audio power amplifier packaged
in an 8-pin PowerPAD™ MSOP package
capable of delivering 150 mW of continuous RMS
power per channel into 8-
loads. Amplifier gain is
externally configured by means of two resistors per
input channel and does not require external compensation
for settings of 1 to 10.
THD+N when driving an 8-W load from 5 V is 0.1% at
1 kHz, and less than 2% across the audio band of 20
Hz to 20 kHz. For 32- loads, the THD+N is reduced
to less than 0.06% at 1 kHz, and is less than 1%
across the audio band of 20 Hz to 20 kHz. For 10-k
loads, the THD+N performance is 0.01% at 1 kHz,
and less than 0.02% across the audio band of 20 Hz
to 20 kHz.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TPA112: 150-mW Stereo Audio Power Amplifier datasheet (Rev. E) | 29 Jun 2004 | |
| Application note | PowerPAD™ Thermally Enhanced Package (Rev. H) | 06 Jul 2018 | ||
| User guide | TPA112MSOPEVM - User Guide (Rev. A) | 17 Apr 2001 | ||
| Application note | A Low-Cost, Single Coupling Capacitor Config. for Stereo Headphone Amplifiers | 22 Dec 1999 |
For additional terms or required resources, click any title below to view the detail page where available.
| Package | Pins | Download |
|---|---|---|
| SOIC (D) | 8 | View options |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.