Part number ICS-40310 Product Type MEMS Microphone - Analog from Manufacturer TDK InvenSense

Status: Standard | Data Sheet: pdf link image   | RoHS Compliance: Rohs Compliant
Features:

• Low Current Consumption: 16 μA
• Small Surface-Mount Package: 3.35 × 2.5 × 0.98 mm
• High SNR of 64 dBA
• Sensitivity of −37 dBV
• 0.9 V to 1.3 V Supply
• Single-Ended Analog Output
• Compatible with Sn/Pb and Pb-Free Solder Processes
• RoHS/WEEE Complian

Description:

The ICS-40310 is a high-performance MEMS microphone with a combination of very low power consumption, high SNR, and a tiny package. Running from a 1V supply, the ICS-40310 consumes only 17 μA of current while providing a 64 dB SNR with an analog 4.5 kΩ impedance output. These features, combined with the benefits of MEMS technology, reflow solder compatibility, and a highly sfable response over time and temperature, make the ICS-40310 an ideal microphone choice for always-on power-sensitive mobile devices. The ICS-40310 is pin-compatible with the ADMP504 and ADMP510.

Part Number:
ICS-40310
Manufacturer:
TDK InvenSense
Signal-to-Noise Ratio:
64 dBA
Sensitivity @ 1 kHz:
-37 dBV
Output:
Analog
Part Status:
NEW
Package Size:
3.35 x 2.50 x 0.98 mm
Terminals:
3
Port Location:
Bottom
Equivalent Input Noise:
30 dBA
Frequency Response:
90Hz to 16kHz
Maximum SPL:
112 dB SPL
Sensitivity Tolerance:
3 ±dB
Package:
LGA_CAV
Chemical exposure warning
This product can expose you to chemicals including Lead, Nickel, and Carbon Black, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Evaluation Board
Analog Output MEMS Microphone Flex Evaluation Board User Guide
Application Note
MICROPHONE SPECIFICATIONS EXPLAINED
Application Note
Recommendations for Sealing TDK Invensense Bottom-Port MEMS Microphones from Dust and Liquid Ingress
Application Note
Recommendations for Mounting and Connecting TDK Invensense MEMS Microphones
Application Note
Analog Output MEMS Microphone Flex Evaluation Board User Guide
Application Note
Microphone Array Beamforming
Application Note
Op Amps for MEMS Microphone Preamp Circuits
Application Note
Understanding Microphone Sensitivity
Application Note
Low Self Noise: The First Step to High-Performance MEMS Microphone Applications

Technical Inquiry Request for ICS-40310 MEMS Microphone - Analog

Fields marked with * are required.
Product Specifications For ICS-40310 MEMS Microphone - Analog
Design Information
Contact Information


Shipping Policy:

Shipping in the U.S. and U.S. Territories
Component Distributors Inc. (CDI) ships items within the continental US and all U.S. territories. No shipments can be made to PO Box addresses. If you export product purchased from CDI, you must follow all export compliance regulations set by the U.S. Dept. of Commerce, U.S. Dept. of State and the U.S. Dept. of Treasury. CDI may require a (LOA) Letter of Assurance that you will comply with all export regulations.

Shipping outside of the United States and U.S. Territories
CDI follows all regulations set by the following agencies for Export compliance (EAR) (15 C.F.R. 730-774) and (ITAR) (22 C.F.R. 120-130).

U.S. Department of Commerce
Bureau of Industry and Security

Tel.: (202) 482-4811
Click here to visit website

U.S. Department of State
Bureau of Political-Military Affairs
Directorate of Defense Trade Controls

Tel.: (202) 663-1282
Click here to visit website

U.S. Department of the Treasury
Office of Foreign Assets Controls

Tel.: (202) 622-2480
Click here to visit website

Other Shipping Policies
CDI can ship on our UPS/FedEx accounts (Prepay and Add) or can use a verified shipping account that you supply to CDI (Freight Collect). All duties, taxes and fees are the responsibility of the customer. CDI uses INCOTERMS=EXW for all inbound and outbound shipments CDI may require the BIS-711 (End User Statement) to be filled out prior to shipping. At times, some vendors will require that CDI obtain a copy of the BIS-711 before shipping according to their export terms and conditions.
CDI uses a verification database to verify all Denied Parties lists (International and Domestic orders) and will complete the AES/EEI filing as required by the Census Bureau when required pursuant to Title 15, CFR 30. CDI ships Monday through Friday only and observes all major holidays. Shipping delays due to these holidays must be considered.

Returns, Refunds and Exchanges Policy

How to Return an Item:
Item(s) must be in original condition to be returned, unless there is a manufacturer defect. Customer must notify CDI within 30 days of ship date, then return the item within 14 days of receiving a RMA from CDI. In order to make sure the item is returnable, please follow the steps below:

  1. First, contact a CDI sales representative within 30 days of ship date of item(s) by calling our toll-free number at 1-800-777-7334 or by emailing sales@cdiweb.com.
  2. Second, if the item is approved for return, CDI will issue a Return Material Authorization (RMA) number. Once the RMA number is received, item must be returned within 14 days. CDI will provide the Customer with specific instructions on where to mail / return item(s) with the RMA number. In most cases returned items will be shipped to the CDI warehouse located at:

    Component Distributors, Inc.
    4770 N. Forest St.
    Unit C
    Denver, CO 80216
    USA
  3. Third, please include the signed RMA in the return package stating the reason for the return and the original receipt.

Return Exceptions:
Only products originally shipped from CDI or from an authorized supplier (drop-ship) will be returned to CDI. By a Customer returning products to CDI, the Customer certifies that the products were purchased from CDI and there has been no substitution of the product from another supplier, distributor or other source of the product. The return should be in the original packaging and in unused condition except if approved defective by a CDI sales representative via an RMA.

Exchanges:
If the item(s) is in new condition and in the original packaging, you may exchange the item(s) for another item in the first 30 days after ship date. Defective item(s) may be exchanged/returned for the same item. Customer will not be subject to a restocking fee in this case, but without being a defective item, will still have to pay return shipping. Items purchased from CDI that have been used or altered will not be accepted for exchange and as stated in the Non-Cancelable and Non-Returnable items section, items noted as NCNR cannot be exchanged.

Non-Cancelable and Non-Returnable Items:
Some items cannot be returned if they are opened. Customer should contact CDI at 1-800-777-7334 or email sales@cdiweb.com before making a purchase with questions regarding the return policy. Customer should read all messages on the www.cdiweb.com Cart Page before purchasing an item. Products listed as NCNR status (Non-cancelable and Non-Returnable), will be stated on the Cart Page before you complete the checkout process.

Return Freight / Restocking Fee:
Reasonable cancellation or restocking charges may include a minimum 15% restocking fee, this will be deducted from the Customer refund. CDI does not refund the original shipping and handling that the Customer paid on the order. Customer must prepay the return freight charges and CDI will not accept COD shipments.

Refunds:
CDI will notify Customer upon receipt and inspection of returned item(s) and will advise of refund status. Upon approval of return and refund, CDI will initiate a credit within 48 hours to the original method of payment. Credits to credit card can take 10 days to post to the account.

Contact Us:
Customer should contact Component Distributors, Inc. (CDI) with questions regarding returns. Please contact us.