Home Interface USB ICs USB hubs & controllers
Home
Interface
USB ICs
USB hubs & controllers

TUSB1210-Q1

ACTIVE

Automotive USB2.0 high-speed 480-Mbps ULPI PHY transceiver

Order now
Data sheet

TUSB1210-Q1

ACTIVE
Data sheet Order now

Product details

Function USB2 USB speed (MBits) 480 Type Transceiver Supply voltage (V) 1.1, 3.3 Rating Automotive Operating temperature range (°C) -40 to 85
Function USB2 USB speed (MBits) 480 Type Transceiver Supply voltage (V) 1.1, 3.3 Rating Automotive Operating temperature range (°C) -40 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • AEC-Q100 Qualified with:
    • Temperature Grade 3: –40°C to 85°C
    • HBM ESD Classification 1C
    • CDM ESD Classification C4B
  • USB2.0 PHY Transceiver Chip, Designed to Interface
    with a USB Controller via a ULPI 12-pin Interface,
    Fully Compliant With:
    • Universal Serial Bus Specification Rev. 2.0
    • On-The-Go Supplement to the USB
      2.0 Specification       Rev. 1.3
    • UTMI+ Low Pin Interface (ULPI) Specification
      Rev. 1.1
  • DP/DM Line External Component Compensation
    (Patent #US7965100 B1)
  • Interfaces to Host, Peripheral and OTG Device Cores;
    Optimized for Portable Devices or System ASICs with
    Built-in USB OTG Device Core
  • Complete USB OTG Physical Front-End that Supports
    Host Negotiation Protocol (HNP) and Session Request
    Protocol (SRP)
  • ULPI Interface:
    • I/O Interface (1.8 V) Optimized for Non-Terminated
      50 Ω Line Impedance
    • ULPI CLOCK Pin (60 MHz) Supports Both Input
      and Output Clock Configurations
    • Fully Programmable ULPI-Compliant Register Set
  • Available in a 32-Pin Quad Flat No Lead
    [QFN (RHB)] Package
  • AEC-Q100 Qualified with:
    • Temperature Grade 3: –40°C to 85°C
    • HBM ESD Classification 1C
    • CDM ESD Classification C4B
  • USB2.0 PHY Transceiver Chip, Designed to Interface
    with a USB Controller via a ULPI 12-pin Interface,
    Fully Compliant With:
    • Universal Serial Bus Specification Rev. 2.0
    • On-The-Go Supplement to the USB
      2.0 Specification       Rev. 1.3
    • UTMI+ Low Pin Interface (ULPI) Specification
      Rev. 1.1
  • DP/DM Line External Component Compensation
    (Patent #US7965100 B1)
  • Interfaces to Host, Peripheral and OTG Device Cores;
    Optimized for Portable Devices or System ASICs with
    Built-in USB OTG Device Core
  • Complete USB OTG Physical Front-End that Supports
    Host Negotiation Protocol (HNP) and Session Request
    Protocol (SRP)
  • ULPI Interface:
    • I/O Interface (1.8 V) Optimized for Non-Terminated
      50 Ω Line Impedance
    • ULPI CLOCK Pin (60 MHz) Supports Both Input
      and Output Clock Configurations
    • Fully Programmable ULPI-Compliant Register Set
  • Available in a 32-Pin Quad Flat No Lead
    [QFN (RHB)] Package

The TUSB1210-Q1 is a USB2.0 transceiver chip, designed to interface with a USB controller via a ULPI interface. It supports all USB2.0 data rates (High-Speed 480 Mbps, Full-Speed 12 Mbps and Low-Speed 1.5 Mbps), and is compliant to both Host and Peripheral modes. It additionally supports a UART mode and legacy ULPI serial modes.

TUSB1210-Q1 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including Host Negotiation Protocol (HNP) and Session Request Protocol (SRP).

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections, and thereby, improve eye diagrams.

The TUSB1210-Q1 is a USB2.0 transceiver chip, designed to interface with a USB controller via a ULPI interface. It supports all USB2.0 data rates (High-Speed 480 Mbps, Full-Speed 12 Mbps and Low-Speed 1.5 Mbps), and is compliant to both Host and Peripheral modes. It additionally supports a UART mode and legacy ULPI serial modes.

TUSB1210-Q1 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including Host Negotiation Protocol (HNP) and Session Request Protocol (SRP).

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections, and thereby, improve eye diagrams.
open-in-new Find other USB hubs & controllers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet TUSB1210-Q1 Standalone USB Transceiver Chip Silicon datasheet (Rev. A) PDF | HTML 02 Oct 2014
EVM User's guide TUSB1210 EVM User's Guide 17 Sep 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

TUSB1210 IBIS Model

SLLM184.ZIP (147 KB) - IBIS Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View options
Package Pins Download
VQFN (RHB) 32 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos