Product details

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.5 Load (min) (Ω) 8 Output power (W) 1.7 SNR (dB) 105 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 4 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 85 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.5 Load (min) (Ω) 8 Output power (W) 1.7 SNR (dB) 105 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 4 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 85 Operating temperature range (°C) -40 to 85
VSON (DRB) 8 9 mm² 3 x 3
  • Designed for Wireless or Cellular Handsets and
    PDAs
  • 1.7 W Into 8 Ω From a 5-V Supply at THD = 10%
    (Typical)
  • Low Supply Current: 4 mA Typical at 5 V
  • Shutdown Current: 0.01 µA Typical
  • Fast Start-Up With Minimal Pop
  • Only Three External Components
    • Improved PSRR (−80 dB) and Wide Supply
      Voltage (2.5 V to 5.5 V) for Direct Battery
      Operation
    • Fully Differential Design Reduces RF
      Rectification
    • −63-dB CMRR Eliminates Two Input Coupling
      Capacitors
  • Pin-to-Pin Compatible With TPA2005D1 and
    TPA6211A1 in SON Package
  • Available in 3 mm × 3 mm SON Package (DRB)
  • Designed for Wireless or Cellular Handsets and
    PDAs
  • 1.7 W Into 8 Ω From a 5-V Supply at THD = 10%
    (Typical)
  • Low Supply Current: 4 mA Typical at 5 V
  • Shutdown Current: 0.01 µA Typical
  • Fast Start-Up With Minimal Pop
  • Only Three External Components
    • Improved PSRR (−80 dB) and Wide Supply
      Voltage (2.5 V to 5.5 V) for Direct Battery
      Operation
    • Fully Differential Design Reduces RF
      Rectification
    • −63-dB CMRR Eliminates Two Input Coupling
      Capacitors
  • Pin-to-Pin Compatible With TPA2005D1 and
    TPA6211A1 in SON Package
  • Available in 3 mm × 3 mm SON Package (DRB)

The TPA6204A1 device (sometimes referred to as TPA6204) is a 1.7-W mono fully-differential amplifier designed to drive a speaker with at least 8-Ω impedance while consuming only 20 mm2 total printed-circuit board (PCB) area in most applications. The device operates from 2.5 V to 5.5 V, drawing only 4 mA of quiescent supply current. The TPA6204A1 (TPA6204) is available in the space-saving 3 mm × 3 mm SON (DRB) package.

The TPA6204A1 (TPA6204) is ideal for PDA or smartphone applications due to features such as −80-dB supply voltage rejection from 20 Hz to 2 kHz, improved RF rectification immunity, small PCB area, and a fast start-up with minimal pop.

The TPA6204A1 device (sometimes referred to as TPA6204) is a 1.7-W mono fully-differential amplifier designed to drive a speaker with at least 8-Ω impedance while consuming only 20 mm2 total printed-circuit board (PCB) area in most applications. The device operates from 2.5 V to 5.5 V, drawing only 4 mA of quiescent supply current. The TPA6204A1 (TPA6204) is available in the space-saving 3 mm × 3 mm SON (DRB) package.

The TPA6204A1 (TPA6204) is ideal for PDA or smartphone applications due to features such as −80-dB supply voltage rejection from 20 Hz to 2 kHz, improved RF rectification immunity, small PCB area, and a fast start-up with minimal pop.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TPA6203A1 ACTIVE 1.25-W, mono, analog input Class-AB audio amplifier Lower power output

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet TPA6204A1 1.7-W Mono Fully Differential Audio Power Amplifier datasheet (Rev. C) PDF | HTML 31 May 2016
Application note Single-Ended Input Pop Reduction for TPA6203A1 23 Jul 2009
More literature TPA6204A1_NanoEVM_ Schematic 13 Feb 2007
More literature TPA6204A1_NanoEVM_OV 29 Jan 2007
User guide TPA6204A1EVM - User Guide 16 Aug 2004

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPA6204A1EVM — TPA6204A1 Evaluation Module (EVM)

The TPA6204A1 is a 1.7-W mono fully differential amplifier designed to drive a speaker with at least 8-Ohm impedance while comsuming less than 20mm2 total board space.

The device operates from 2.5V to 5.5V while consuming only 4mA of quiescent current. The TPA6204A1 is available in a space-saving (...)

User guide: PDF
Not available on TI.com
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
VSON (DRB) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos