VSP5000 is not recommended for new designs
Although this product continues to be in production to support previous designs, we don't recommend it for new designs. Consider one of these alternates:
open-in-new Compare alternates
Similar functionality to the compared device
VSP5610 ACTIVE 16 bit, 35MSPS Four Channel Imaging Analog Front End This product is a 3-s - 5-s monitor with integrated ADC.

Product details

Resolution (Bits) 12 Sample rate (Msps) 30 Gain (min) (dB) 0 Gain (max) (dB) 24 Pd (typ) (mW) 290 Supply voltage (max) (V) 3.6 Operating temperature range (°C) -25 to 85 Output data format CMOS Parallel Rating Catalog
Resolution (Bits) 12 Sample rate (Msps) 30 Gain (min) (dB) 0 Gain (max) (dB) 24 Pd (typ) (mW) 290 Supply voltage (max) (V) 3.6 Operating temperature range (°C) -25 to 85 Output data format CMOS Parallel Rating Catalog
LQFP (PM) 64 144 mm² 12 x 12
  • Dual Channel CCD Signal Processing:
    • Correlated Double Sampler (CDS)
    • Sample Hold Mode
    • Digital Programmable Amplifier
    • CCD Offset Correction (OB loop)
  • High Performance A/D:
    • 12-Bit Resolution
    • INL: ±2 LSB
    • DNL: ±0.5 LSB
    • No Missing Codes
  • High-Speed Operation
    • Sample Rate: 30 MHz (Minimum)
  • 78-dB Signal-To-Noise Ratio (at 0-dB Gain)
  • Low Power Consumption:
    • Low Voltage: 3 V to 3.6 V
    • Low Power: 290 mW (Typ) at 3.3 V
    • Standby Mode: 20 mW (Typ)
  • APPLICATIONS
    • Copiers
    • Scanners
    • Facsimiles

  • Dual Channel CCD Signal Processing:
    • Correlated Double Sampler (CDS)
    • Sample Hold Mode
    • Digital Programmable Amplifier
    • CCD Offset Correction (OB loop)
  • High Performance A/D:
    • 12-Bit Resolution
    • INL: ±2 LSB
    • DNL: ±0.5 LSB
    • No Missing Codes
  • High-Speed Operation
    • Sample Rate: 30 MHz (Minimum)
  • 78-dB Signal-To-Noise Ratio (at 0-dB Gain)
  • Low Power Consumption:
    • Low Voltage: 3 V to 3.6 V
    • Low Power: 290 mW (Typ) at 3.3 V
    • Standby Mode: 20 mW (Typ)
  • APPLICATIONS
    • Copiers
    • Scanners
    • Facsimiles

The VSP5000 device is a complete application specific standard product (ASSP) for charge-coupled device (CCD) line sensor applications such as copiers, scanners, and facsimiles. The VSP5000 device provides two independent channels of processing lines and performs analog front-end processing and analog-to-digital (A/D) conversion. Each channel has a correlated double sampler (CDS)/sample hold (SH) circuit, a 14-bit analog-to-digital converter (ADC), a digital programmable gain amplifier (DPGA), and an optical black (OB) correction loop. Data output is 12 bits in length and the 2-channel A/D data is multiplexed and output.

The VSP5000 is available in a 64-lead LQFP package and operates from a single 3.3-V supply.

The VSP5000 device is a complete application specific standard product (ASSP) for charge-coupled device (CCD) line sensor applications such as copiers, scanners, and facsimiles. The VSP5000 device provides two independent channels of processing lines and performs analog front-end processing and analog-to-digital (A/D) conversion. Each channel has a correlated double sampler (CDS)/sample hold (SH) circuit, a 14-bit analog-to-digital converter (ADC), a digital programmable gain amplifier (DPGA), and an optical black (OB) correction loop. Data output is 12 bits in length and the 2-channel A/D data is multiplexed and output.

The VSP5000 is available in a 64-lead LQFP package and operates from a single 3.3-V supply.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet 12-Bit 30 MSPS Dual Channel CCD Signal Front End for Digital Copier datasheet (Rev. A) 17 Apr 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
LQFP (PM) 64 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos