Product details

Resolution (Bits) 10 Sample rate (Msps) 27 Gain (min) (dB) 3 Gain (max) (dB) 34 Pd (typ) (mW) 190 Supply voltage (max) (V) 3.6 Operating temperature range (°C) -25 to 85 Output data format CMOS Parallel Rating Catalog
Resolution (Bits) 10 Sample rate (Msps) 27 Gain (min) (dB) 3 Gain (max) (dB) 34 Pd (typ) (mW) 190 Supply voltage (max) (V) 3.6 Operating temperature range (°C) -25 to 85 Output data format CMOS Parallel Rating Catalog
LQFP (PT) 48 81 mm² 9 x 9
  • CCD SIGNAL PROCESSING:
    Correlated Double Sampling
    Black Level Clamping
    –2 to +34dB Gain Ranging
    High SNR: 53dB
  • 10-bit a/d conversion:
    Up to 27MHz Conversion Rate
    No Missing Codes
  • PORTABLE OPERATION:
    Low Voltage: 2.7V to 3.6V
    Low Power: 190mW at 3.0V
  • LOW POWER: 160mW at 2.7V
  • POWER-DOWN MODE: 18mW
  • CCD SIGNAL PROCESSING:
    Correlated Double Sampling
    Black Level Clamping
    –2 to +34dB Gain Ranging
    High SNR: 53dB
  • 10-bit a/d conversion:
    Up to 27MHz Conversion Rate
    No Missing Codes
  • PORTABLE OPERATION:
    Low Voltage: 2.7V to 3.6V
    Low Power: 190mW at 3.0V
  • LOW POWER: 160mW at 2.7V
  • POWER-DOWN MODE: 18mW

The VSP2101Y is a complete digital camera IC, providing signal conditioning and 10-bit analog-to-digital conversion for the output of a CCD array.

The primary CCD channel provides correlated double sampling to extract the video information from the pixels, -2dB to +34dB gain ranging with digital control for varying illumination conditions, and black level clamping for an accurate black reference.

Input signal clamping and offset correction of the CDS is also performed. The stable gain control is linear in dB. Additionally, the black level is quickly recovered after gain change. An on-chip general purpose 10-bit digital-to-analog converter allows you to obtain analog control voltage for iris control.

The VSP2101Y is available in a 48-lead LQFP package and operates from a single +3V supply.

The VSP2101Y is a complete digital camera IC, providing signal conditioning and 10-bit analog-to-digital conversion for the output of a CCD array.

The primary CCD channel provides correlated double sampling to extract the video information from the pixels, -2dB to +34dB gain ranging with digital control for varying illumination conditions, and black level clamping for an accurate black reference.

Input signal clamping and offset correction of the CDS is also performed. The stable gain control is linear in dB. Additionally, the black level is quickly recovered after gain change. An on-chip general purpose 10-bit digital-to-analog converter allows you to obtain analog control voltage for iris control.

The VSP2101Y is available in a 48-lead LQFP package and operates from a single +3V supply.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet VSP2101 SpeedPlus™ CCD Signal Processor For Digital Cameras datasheet (Rev. A) 16 Apr 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
LQFP (PT) 48 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos