3D Model Datasheet

ZXC Series

Z-Axis RFID Transponder Coils

Our ZXC Series of compact z-axis coil provides a 3rd dimension ID with other X-Y RFID coils. Values range from 2.48 mH to 14.8 mH. Inductance is specified at 125 kHz and all come in a ±5% tolerance.

Provides 3rd dimension ID, designed to be used with any of our other RFID coils
Only 10 mm square and 2.2 mm high
Four pads for excellent board adhesion

Buy Now:

Part number

Find my part

Count	Unit price
1	$2.36
500	$2.03
1000	$1.58
2500	$1.36
5000	$1.25

For high volume or non-stock items, request a quote.

Termination

L = Matte tin over nickel

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

. in stock, ready to ship today.

Request a Sample:

Part number

Find my part

Specifications

Electrical specifications at 25°C.

Part number 1	Inductance (mH) at 125 kHz 2 (Tolerance: ±5%)	Q min	Read distance (inch/cm) 3	Sensitivity (mV/µT) 4	Matching capacitor (pF) 5	DCR max (Ω) 6	SRF typ (kHz) 7
ZXC-255XJL_	2.48	57	32.99 / 83.8	9.75	654	37.0	1975
ZXC-495XJL_	4.90	64	32.99 / 83.8	18	331	43.0	1370
ZXC-715XJL_	7.10	65	30.98 / 78.7	25	228	62.0	1220
ZXC-116XJL_	11.40	60	30.98 / 78.7	50	142	110	990
ZXC-156XJL_	14.80	55	30.98 / 78.7	77	110	160	815

Notes

When ordering, please specify termination and packaging codes: e.g. ZXC-156XJLD
Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended procedures, contact Coilcraft.
Read distance measured using the KEELOQÂ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the voltage across the resonant circuit dropped below 10mV.
Sensitivity measured in accordance with Coilcraft application note Measuring Sensitivity of Transponder Coils.
Matching capacitor value required for parallel resonant circuit operating at 125 kHz.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer. Details

Refer to Application Notes Transponder Coils in an RFID System and Measuring Sensitivity of Transponder Coils for additional information.

Termination:

L = RoHS compliant matte tin over nickel over phos bronze
Special order, added cost: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).

Packaging:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

−40°C to +125°C

Storage temperature range:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

L vs Frequency

Q vs Frequency

Physical characteristics

Tape and Reel specification

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	2000*	178/330	60/100	13	30,4	24,4	24	8	4	2	2,24	0,3

* Special order

General specification

Core Material:

Ferrite

Weight:

0.53 - 0.56 g

Temperature coefficient of inductance:

+25 to +200 ppm/°C

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 â€“ 40 seconds), allowing parts to cool to room temperature between.

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested with pure water or alcohol only. Details.

ZXC Series

Z-Axis RFID Transponder Coils