Home Power management Voltage references Shunt voltage references

LM4041-N

ACTIVE

Fixed & adjustable, 45-µA, precision micropower shunt voltage reference

Product details

VO (V) 1.225 Initial accuracy (max) (%) 0.1, 0.2, 0.5, 1, 2 VO adj (min) (V) 1.24 VO adj (max) (V) 10 Iz for regulation (min) (µA) 60 Reference voltage (V) Fixed, adjustable Rating Catalog Temp coeff (max) (ppm/°C) 100, 150 Operating temperature range (°C) -40 to 125 Iout/Iz (max) (mA) 12
VO (V) 1.225 Initial accuracy (max) (%) 0.1, 0.2, 0.5, 1, 2 VO adj (min) (V) 1.24 VO adj (max) (V) 10 Iz for regulation (min) (µA) 60 Reference voltage (V) Fixed, adjustable Rating Catalog Temp coeff (max) (ppm/°C) 100, 150 Operating temperature range (°C) -40 to 125 Iout/Iz (max) (mA) 12
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37 SOT-SC70 (DCK) 5 4.2 mm² 2 x 2.1 TO-92 (LP) 3 19.136 mm² 5.2 x 3.68
  • Qualified for Automotive Applications
  • SEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to
      +125°C Ambient Temperature Range
    • Device Temperature Grade 3: –40°C to +85°C
      Ambient Temperature Range (For SOT-23
      Only)
  • Available in Standard, AEC Q-100 Grade 1
    (Extended Temperature Range), and Grade 3
    (Industrial Temperature Range) Qualified Versions
    (SOT-23 Only)
  • Small Packages: SOT-23, TO-92, and SC70
  • No Output Capacitor Required
  • Tolerates Capacitive Loads
  • Reverse Breakdown Voltage Options of 1.225 V
    and Adjustable
  • Output Voltage Tolerance (A grade, 25°C) =
    ±0.1%(Maximum)
  • Low Output Noise (10 Hz to 10kHz) = 20 µVrms
  • Wide Operating Current Range of 60 µA to 12 mA
  • Industrial Temperature Range (LM4041A/B-N,
    LM4041-N-Q1A/Q1B) of –40°C to +85°C
  • Extended Temperature Range (LM4041C/D/E-N,
    LM4041-N-Q1C/Q1D/Q1E) of –40°C to +125°C
  • Low Temperature Coefficient of 100 ppm/°C

    (Maximum)
  • Qualified for Automotive Applications
  • SEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to
      +125°C Ambient Temperature Range
    • Device Temperature Grade 3: –40°C to +85°C
      Ambient Temperature Range (For SOT-23
      Only)
  • Available in Standard, AEC Q-100 Grade 1
    (Extended Temperature Range), and Grade 3
    (Industrial Temperature Range) Qualified Versions
    (SOT-23 Only)
  • Small Packages: SOT-23, TO-92, and SC70
  • No Output Capacitor Required
  • Tolerates Capacitive Loads
  • Reverse Breakdown Voltage Options of 1.225 V
    and Adjustable
  • Output Voltage Tolerance (A grade, 25°C) =
    ±0.1%(Maximum)
  • Low Output Noise (10 Hz to 10kHz) = 20 µVrms
  • Wide Operating Current Range of 60 µA to 12 mA
  • Industrial Temperature Range (LM4041A/B-N,
    LM4041-N-Q1A/Q1B) of –40°C to +85°C
  • Extended Temperature Range (LM4041C/D/E-N,
    LM4041-N-Q1C/Q1D/Q1E) of –40°C to +125°C
  • Low Temperature Coefficient of 100 ppm/°C

    (Maximum)

Ideal for space-critical applications, the LM4041-N precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount packages. The advanced design of the LM4041-N eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, thus making the LM4041-N easy to use. Further reducing design effort is the availability of a fixed (1.225 V) and adjustable reverse breakdown voltage. The minimum operating current is 60 µA for the LM4041-N 1.2 and the LM4041-N ADJ. Both versions have a maximum operating current of 12 mA.

The LM4041-N uses fuse and Zener-zap reverse breakdown or reference voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than ±0.1% (A grade) at 25°C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents.

Ideal for space-critical applications, the LM4041-N precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount packages. The advanced design of the LM4041-N eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, thus making the LM4041-N easy to use. Further reducing design effort is the availability of a fixed (1.225 V) and adjustable reverse breakdown voltage. The minimum operating current is 60 µA for the LM4041-N 1.2 and the LM4041-N ADJ. Both versions have a maximum operating current of 12 mA.

The LM4041-N uses fuse and Zener-zap reverse breakdown or reference voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than ±0.1% (A grade) at 25°C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
LM4051-N ACTIVE Fixed & adjustable, precision micropower shunt voltage reference Lower temperature drift (50 ppm/°C)

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 8
Type Title Date
* Data sheet LM4041/LM4041-N-Q1 Precision Micropower Shunt Voltage Reference datasheet (Rev. G) 08 Oct 2015
Application note Precision Current Sources and Sinks Using Voltage References 30 Jun 2020
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 28 Jun 2019
Technical article Power Tips: Where to connect frequency analyzer reference leads for Bode plot meas PDF | HTML 06 Oct 2016
Technical article Digitally select your reference voltage PDF | HTML 27 Apr 2016
Application note TO-92 Packing Options / Ordering Instructions (Rev. A) 23 Jun 2010
Application note Adaptive Speed Control for Automotive Systems 20 Nov 2007
White paper Precision Method for Laser Diode Emission Control 01 Aug 2004

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

LM4041-NA1P2 PSpice Transient Model (Rev. A)

SNOM371A.ZIP (96 KB) - PSpice Model
Simulation model

LM4041-NA1P2 Unencrypted PSpice Transient Model (Rev. A)

SNOM529A.ZIP (1 KB) - PSpice Model
Simulation model

LM4041-NADJC PSpice Transient Model

SNOM390.ZIP (26 KB) - PSpice Model
Simulation model

LM4041-NADJC Unencrypted PSpice Transient Model

SNOM528.ZIP (1 KB) - PSpice Model
Simulation model

LM4041-NADJD PSpice Transient Model

SNOM391.ZIP (26 KB) - PSpice Model
Simulation model

LM4041-NADJD Unencrypted PSpice Transient Model

SNOM527.ZIP (1 KB) - PSpice Model
Simulation model

LM4041-NB1P2 PSpice Transient Model

SNOM370.ZIP (25 KB) - PSpice Model
Simulation model

LM4041-NB1P2 Unencrypted PSpice Transient Model

SNOM530.ZIP (1 KB) - PSpice Model
Simulation model

LM4041-NC1P2 PSpice Transient Model

SNOM368.ZIP (25 KB) - PSpice Model
Simulation model

LM4041-NC1P2 Unencrypted PSpice Transient Model

SNOM532.ZIP (1 KB) - PSpice Model
Simulation model

LM4041-ND1P2 PSpice Transient Model

SNOM369.ZIP (25 KB) - PSpice Model
Simulation model

LM4041-ND1P2 Unencrypted PSpice Transient Model

SNOM531.ZIP (1 KB) - PSpice Model
Simulation model

LM4041-NE1P2 PSpice Transient Model

SNOM367.ZIP (25 KB) - PSpice Model
Simulation model

LM4041-NE1P2 Unencrypted PSpice Transient Model

SNOM533.ZIP (1 KB) - PSpice Model
Simulation model

LM4041_NA1P2 TINA-TI Reference Design

SNOM428.TSC (72 KB) - TINA-TI Reference Design
Simulation model

LM4041_NA1P2 TINA-TI Transient Spice Model

SNOM429.ZIP (8 KB) - TINA-TI Spice Model
Simulation model

LM4041_NADJC1P2 TINA-TI Reference Design

SNOM431.TSC (96 KB) - TINA-TI Reference Design
Simulation model

LM4041_NADJC1P2 TINA-TI Transient Spice Model

SNOM430.ZIP (9 KB) - TINA-TI Spice Model
Simulation model

LM4041_NADJD1P2 TINA-TI Reference Design

SNOM424.TSC (96 KB) - TINA-TI Reference Design
Simulation model

LM4041_NADJD1P2 TINA-TI Transient Spice Model

SNOM425.ZIP (9 KB) - TINA-TI Spice Model
Simulation model

LM4041_NB1P2 TINA-TI Reference Design

SNOM426.TSC (72 KB) - TINA-TI Reference Design
Simulation model

LM4041_NB1P2 TINA-TI Transient Spice Model

SNOM427.ZIP (9 KB) - TINA-TI Spice Model
Calculation tool

SHUNT_VOLTAGE_REFERENCE_RESISTOR_CALCULATOR Shunt Voltage Reference External Resistor Quick Start Calculator

This external resistor quick-start calculator tool lets you easily calculate valid external resistor values relative to voltage reference, supply and load-current bounds. With these inputs, you can instantly view the resulting calculations and use the color-coded indications to understand (...)

Supported products & hardware

Supported products & hardware

Products
Die & wafer services
LM336-2.5-MIL Shunt Voltage Reference
Shunt voltage references
ATL431 2.5-V low-IQ adjustable precision shunt regulator LM136-2.5-N Voltage Reference Diode LM136-5.0 5.0V Reference Diode LM136-5.0QML 5.0V Reference Diode LM136A-2.5QML 2.5V Reference Diode LM136A-2.5QML-SP Radiation-hardened QMLV, 2.5-V shunt voltage reference LM136A-5.0QML 5.0V Reference Diode LM185-1.2-N Micropower Voltage Reference Diode LM185-1.2QML Micropower Voltage Reference Diode LM185-1.2QML-SP Radiation-hardened QMLV, 1.2-V shunt voltage reference LM185-2.5-N Micropower Voltage Reference Diode LM185-2.5QML Micropower Voltage Reference Diode LM185-2.5QML-SP Space-grade QMLV 2.5-V  shunt voltage reference LM185-ADJ Adjustable Micropower Voltage Reference LM185QML Adjustable Micropower Voltage Reference LM285-1.2 1.235-V, –40°C to +85°C, micropower voltage reference LM285-1.2-N 1.235-V, –40°C to +85°C, micropower voltage reference diode LM285-2.5 2.5-V, –40°C to +85°C, micropower voltage reference LM285-2.5-N 2.5-V, –40°C to +85°C, micropower voltage reference diode LM285-ADJ Adjustable, 85°C, micropower voltage reference LM336-2.5 0°C to 70°C, 2.5-V integrated reference circuit LM336-2.5-N Voltage reference diode LM336-5.0 5-V reference diode LM385-1.2 1.235-V, 2%, 0°C to 70°C, micropower voltage reference LM385-1.2-MIL Micropower Voltage Reference LM385-1.2-N 1.235-V, 0°C to 70°C, micropower voltage reference diode LM385-2.5 2.5-V, 2%, 70°C, micropower voltage reference LM385-2.5-N 2.5-V, 0°C to 70°C, micropower voltage reference diode LM385-ADJ Adjustable, 70°C, micropower voltage reference LM4030 Ultra-high-precision shunt voltage reference LM4040 Fixed voltage, 45-µA, precision micropower shunt voltage reference LM4040-N 100-ppm/°C precision micropower shunt voltage reference LM4040-N-Q1 Automotive, 100-ppm/°C precision micropower shunt voltage reference LM4041-N Fixed & adjustable, 45-µA, precision micropower shunt voltage reference LM4041-N-Q1 Automotive, precision micropower shunt voltage reference LM4050-N 50-ppm/°C precision micropower shunt voltage reference LM4050-N-Q1 Automotive, 50-ppm/°C precision micropower shunt voltage reference LM4050QML-SP Radiation-hardened QMLV, 2.5-V or 5-V shunt voltage reference LM4051-N Fixed & adjustable, precision micropower shunt voltage reference LM431 2%, 1%, or 0.5% accuracy, adjustable precision Zener shunt regulator LM4431 Micropower shunt voltage reference LMV431 1.5%, low-voltage (1.24-V) adjustable precision shunt regulator LMV431A 1%, low-voltage (1.24-V) adjustable precision shunt regulator LMV431B 0.5%, low-voltage (1.24-V) adjustable precision shunt regulator
Current references
LM134 3-Terminal Adjustable Current Source LM234 100°C 3-pin adjustable current source LM334 0°C to 70°C 3-pin adjustable current source
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs

TIDA-00807 — Fault Monitoring for Overhead Fault Indicators using Ultra Low Power Reference Design

Fault Indicators (FI) are devices installed at certain distance on overhead power lines in electric power distribution networks to detect and indicate the occurence of faults. The benefit is reduction in outage times by identifying the fault zone easily.  The TIDA-00807 reference design (...)
Design guide: PDF
Schematic: PDF
Reference designs

TIDM-BIOSIGNMONITOR — Multi-Parameter Bio-Signal Monitor Reference Design For Personal Monitoring

The Multi-Parameter Bio-signal Monitor (MPBSM) is a proof-of-concept Evaluation Module (EVM) that is capable of measuring three of the four primary vital signs. The MPBSM proof of concept can directly measure Electrocardiogram (ECG), Galvanic Skin Response (GSR), and skin temperature. The MPBSM (...)
Design guide: PDF
Schematic: PDF
Package Pins Download
SOT-23 (DBZ) 3 View options
SOT-SC70 (DCK) 5 View options
TO-92 (LP) 3 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos