Home Power management DC/DC switching regulators Step-down (buck) regulators Buck converters (integrated switch)

LM3280

ACTIVE

Adjustable Step-Down DC-DC Converter and 3 LDOs for RF Power Management

Product details

Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 0.8 Vout (max) (V) 3.6 Iout (max) (A) 0.5 Operating temperature range (°C) -30 to 85 Rating Catalog Type Converter
Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 0.8 Vout (max) (V) 3.6 Iout (max) (A) 0.5 Operating temperature range (°C) -30 to 85 Rating Catalog Type Converter
DSBGA (YZR) 16 5.0625 mm² 2.25 x 2.25
  • 2MHz (typ.) PWM Switching Frequency
  • Operates from a Single Li-Ion Cell (2.7V to 5.5V)
  • Adjustable Output Voltage (0.8V to 3.6V) DC-DC
  • High-Efficiency Synchronous Buck Converter
  • 300mA Maximum Load Capability (PWM Mode)
  • 500mA Maximum Load Capability (Bypass mode)
  • PWM, Forced and Automatic Bypass Mode
  • 3 Low-Dropout and Fast Transient Response LDOs
  • 16-pin DSBGA Package
  • Current Overload Protection
  • Thermal Overload Protection
  • 2MHz (typ.) PWM Switching Frequency
  • Operates from a Single Li-Ion Cell (2.7V to 5.5V)
  • Adjustable Output Voltage (0.8V to 3.6V) DC-DC
  • High-Efficiency Synchronous Buck Converter
  • 300mA Maximum Load Capability (PWM Mode)
  • 500mA Maximum Load Capability (Bypass mode)
  • PWM, Forced and Automatic Bypass Mode
  • 3 Low-Dropout and Fast Transient Response LDOs
  • 16-pin DSBGA Package
  • Current Overload Protection
  • Thermal Overload Protection

The LM3280 is a multi-functional Power Management Unit, optimized for low-power handheld applications such as Cellular Phones.

The LM3280 incorporates three low-dropout LDO voltage regulators and one step down PWM DC-DC converter with an internal Bypass FET. The step down converter's output voltage can be set using an analog input (VCON) for optimizing efficiency of the RF PA at various power levels. The LDO operates a nominal output voltage of 2.85V and maximum load current capability of 20mA for a reference voltage required by linear RF power amplifiers. The LM3280 additionally features a separate enable pin for each output.

The LM3280 is available in a 16-pin lead free DSBGA package.

The LM3280 is a multi-functional Power Management Unit, optimized for low-power handheld applications such as Cellular Phones.

The LM3280 incorporates three low-dropout LDO voltage regulators and one step down PWM DC-DC converter with an internal Bypass FET. The step down converter's output voltage can be set using an analog input (VCON) for optimizing efficiency of the RF PA at various power levels. The LDO operates a nominal output voltage of 2.85V and maximum load current capability of 20mA for a reference voltage required by linear RF power amplifiers. The LM3280 additionally features a separate enable pin for each output.

The LM3280 is available in a 16-pin lead free DSBGA package.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet LM3280 Adjustable Step-Down DC-DC Converter and 3 LDOs for RF Power Management datasheet (Rev. B) 19 Feb 2013
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
EVM User's guide AN-1539 LM3280 Evaluation Board (Rev. A) 30 Apr 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
DSBGA (YZR) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos