Active-low reset IC with programmable delay and 1% reset threshold

LP3470 is not recommended for new designs
Although this product continues to be in production to support previous designs, we don't recommend it for new designs. Consider one of these alternates:
open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
LP3470A ACTIVE Ultra-low-power active-low reset IC with programmable delay and 1% reset threshold This device features improvements including lower IQ (0.3 μA), wider input voltage (10 V) and wider temperature range (-40°C to +125°C).

Product details

Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.63, 2.75, 2.83, 2.93, 3.08, 3.65, 4, 4.38, 4.63, 5.48 Reset threshold accuracy (%) 1 Iq (typ) (mA) 0.016 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 0.5 Supply voltage (max) (V) 5 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.63, 2.75, 2.83, 2.93, 3.08, 3.65, 4, 4.38, 4.63, 5.48 Reset threshold accuracy (%) 1 Iq (typ) (mA) 0.016 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 0.5 Supply voltage (max) (V) 5 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • 5-Pin SOT-23 Package
  • Open-Drain Reset Output
  • Programmable Reset Time-Out Period Using an
    External Capacitor
  • Immune to Short VCC Transients
  • ±1% Reset Threshold Accuracy Over
    Temperature
  • Low Quiescent Current (16 µA typical)
  • Reset Valid Down to VCC = 0.5 V
  • 5-Pin SOT-23 Package
  • Open-Drain Reset Output
  • Programmable Reset Time-Out Period Using an
    External Capacitor
  • Immune to Short VCC Transients
  • ±1% Reset Threshold Accuracy Over
    Temperature
  • Low Quiescent Current (16 µA typical)
  • Reset Valid Down to VCC = 0.5 V

The LP3470 device is a micropower voltage supervisory circuit designed to monitor voltages within 1% of reset threshold over temperature. It provides maximum adjustability for power-on-reset (POR) and supervisory functions.

The LP3470 asserts a reset signal whenever the VCC supply voltage falls below a reset threshold. The reset time-out period is adjustable using an external capacitor. Reset remains asserted for an interval (programmed by an external capacitor) after VCC has risen above the threshold voltage.

For information on available reset threshold voltage options, see Mechanical, Packaging, and Orderable Information.

The LP3470 device is a micropower voltage supervisory circuit designed to monitor voltages within 1% of reset threshold over temperature. It provides maximum adjustability for power-on-reset (POR) and supervisory functions.

The LP3470 asserts a reset signal whenever the VCC supply voltage falls below a reset threshold. The reset time-out period is adjustable using an external capacitor. Reset remains asserted for an interval (programmed by an external capacitor) after VCC has risen above the threshold voltage.

For information on available reset threshold voltage options, see Mechanical, Packaging, and Orderable Information.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet LP3470 Voltage Supervisor With Programmable Delay and 1% Reset Threshold datasheet (Rev. G) PDF | HTML 27 Apr 2016
Application brief Migrating Designs to LP3470A Low Iq Voltage Supervisor for Improved Power Supply (Rev. A) 16 Apr 2020
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 28 Jun 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Application note Maximizing Start-Up Loads w/LM3352 Regulated Buck-Boost Switched Cap Converter (Rev. B) 06 May 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

LP3470 PSpice Transient Model

SNVM696.ZIP (30 KB) - PSpice Model
Simulation model

LP3470 TINA-TI Transient Reference Design

SNVM697.TSC (191 KB) - TINA-TI Reference Design
Simulation model

LP3470 TINA-TI Transient Spice Model

SNVM698.ZIP (7 KB) - TINA-TI Spice Model
Simulation model

LP3470 Unencrypted PSpice Transient Model

SNVMBG1.ZIP (1 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
SOT-23 (DBV) 5 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos