Product details

Number of input channels 1 Features Current Sources (iDACs), PGA Operating temperature range (°C) -40 to 125 Vs (min) (V) 1.8 Vs (max) (V) 6 Interface type Serial SPI Rating Catalog
Number of input channels 1 Features Current Sources (iDACs), PGA Operating temperature range (°C) -40 to 125 Vs (min) (V) 1.8 Vs (max) (V) 6 Interface type Serial SPI Rating Catalog
TSSOP (PW) 16 32 mm² 5 x 6.4
  • Active Guarding
  • Key Specifications
    Unless otherwise noted, typical values at
    TA = 25°C, VS = (VDD-GND) = 3.3 V
    • pH Buffer Input Bias Current (0 < VINP < 3.3 V)
      • Maximum at 25°C: ±125 fA
      • Maximum at 85°C: ±445 fA
    • pH Buffer Input Bias Current
      (–500 mV < VINP– VCM < 500 mV),
      VS = (VDD – GND) = 0 V
      • Maximum at 25°C: ±600 fA
      • Maximum at 85°C: ±6.5 pA
    • pH Buffer Input Offset Voltage: ±200 µV
    • pH Buffer Input Offset Voltage Drift: ±2.5 µV/°C
    • Supply Current: 50 µA
    • Supply Voltage: 1.8 V to 5.5 V
    • Operating Temperature Range: –40°C to 125°C
    • Package: 16-Pin TSSOP
  • Active Guarding
  • Key Specifications
    Unless otherwise noted, typical values at
    TA = 25°C, VS = (VDD-GND) = 3.3 V
    • pH Buffer Input Bias Current (0 < VINP < 3.3 V)
      • Maximum at 25°C: ±125 fA
      • Maximum at 85°C: ±445 fA
    • pH Buffer Input Bias Current
      (–500 mV < VINP– VCM < 500 mV),
      VS = (VDD – GND) = 0 V
      • Maximum at 25°C: ±600 fA
      • Maximum at 85°C: ±6.5 pA
    • pH Buffer Input Offset Voltage: ±200 µV
    • pH Buffer Input Offset Voltage Drift: ±2.5 µV/°C
    • Supply Current: 50 µA
    • Supply Voltage: 1.8 V to 5.5 V
    • Operating Temperature Range: –40°C to 125°C
    • Package: 16-Pin TSSOP

The LMP91200 device is a sensor AFE for use in low-power, analytical-sensing applications. The LMP91200 is designed for 2-electrode sensors. This device provides all of the functionality needed to detect changes based on a delta voltage at the sensor. Optimized for low-power applications, the LMP91200 works over a voltage range of 1.8 V to 5.5 V. With its extremely low input bias current it is optimized for use with pH sensors. Also, in absence of supply voltage the very low input bias current reduces degradation of the pH probe when connected to the LMP91200. Two guard pins provide support for high parasitic impedance wiring. Depending on the configuration, total current consumption for the device is 50 µA while measuring pH. Available in a 16-pin TSSOP package, the LMP91200 operates from –40°C to +125°C.

The LMP91200 device is a sensor AFE for use in low-power, analytical-sensing applications. The LMP91200 is designed for 2-electrode sensors. This device provides all of the functionality needed to detect changes based on a delta voltage at the sensor. Optimized for low-power applications, the LMP91200 works over a voltage range of 1.8 V to 5.5 V. With its extremely low input bias current it is optimized for use with pH sensors. Also, in absence of supply voltage the very low input bias current reduces degradation of the pH probe when connected to the LMP91200. Two guard pins provide support for high parasitic impedance wiring. Depending on the configuration, total current consumption for the device is 50 µA while measuring pH. Available in a 16-pin TSSOP package, the LMP91200 operates from –40°C to +125°C.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 6
Type Title Date
* Data sheet LMP91200 Configurable AFE for Low Power Chemical Sensing Apps datasheet (Rev. E) 29 Feb 2016
Technical article What can we learn for IIoT from the man who invented the Web? PDF | HTML 12 Jan 2016
Application note AN-2254 MSP430 Interface to LMP91200 Code Library (Rev. A) 01 May 2013
More literature Sensor Analog Front Ends Brochure 30 Oct 2012
EVM User's guide LMP91200 Sensor AFE Evaluation Board User's Guide (Rev. A) 30 May 2012
EVM User's guide LMP91200 Sensor AFE Evaluation Board User's Guide 07 May 2012

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Driver or library

SNAC044 Associated Files for Application Note MSP430 Interface to LMP91200 Code Library

Supported products & hardware

Supported products & hardware

Products
Signal conditioners
LMP91200 Integrated AFE for Low-Power pH Sensing Applications
Simulation model

LMP91200 PSpice Transient Model (Rev. A)

SNAM129A.ZIP (25 KB) - PSpice Model
Simulation model

LMP91200 TINA-TI Reference Design

SNAM130.TSC (395 KB) - TINA-TI Reference Design
Simulation model

LMP91200 TINA-TI Transient Spice Model (Rev. A)

SNAM131A.ZIP (54 KB) - TINA-TI Spice Model
Reference designs

TIDA-00561 — Wireless pH Sensor Transmitter (DevPack for SensorTag) Reference Design

TIDA-00561 shows how to build an industrial-grade wireless pH transmitter for process control. This reference design includes a designed pH front-end which can be connected directly via its onboard connector to most pH probes used in process control. The performance data was tested and (...)
Design guide: PDF
Schematic: PDF
Package Pins Download
TSSOP (PW) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos